
Refract Selection Guice (5MB).pdf
| This catalog has no sub-catalogs. |
J257 Automatic Refractometer Complete with Standard Presser
J257 AUTOMATIC REFRACTOMETER
ApplicationThe J257 is designed as a multi purpose refractometer for a broad range of refractive index applications. The wide refractive index range of 1.26-1.70 means that this instrument can measure many materials that a refractometer with a food refractive index range of 1.33-1.53 cannot. OperationOperating the J257 is as simple as placing a sample on the prism, closing the cover and reading the answer � all in just a few seconds. There are no shadow lines to match and there is no eyepiece requiring any kind of operator determination or manual adjustment. When the "measure when stable" mode is selected, the J257 automatically waits until the sample has been heated or cooled to a predefined temperature before initiating a measurement. InterfaceA large 7.5cm x 10cm cold cathode fluroescent back lit graphics LCD allows the scale, sample temperature, set temperature, air temperature, time, date, and temperature correction status to be easily viewed. All functions are activated through a touchscreen panel that will not wear out or get misplaced like traditional or detachable keyboards. The touchscreen is resistant to fingernails, sharp objects, chemicals, and acids. Dual Temperature Control SystemUnlike other temperature controlled refractometers, the J257 has temperature control from both above and below the sample. The sample cover is controlled to the same temperature as the prism and, when lowered, is designed to provide a temperature controlled micro environment that provides unrivaled temperature stability, fast measurement time and minimal evaporation. Depending on options, the sample cover can also be used to initiate measurement. This means that the operator doesn't even need to touch the refractometer screen on a day to day basis, simple lower the cover and measurement starts automatically. Optional Sample PresserThe J257 is available with an optional Temperature Controlled Sample Presser that touches the sample. Compared with the standard temperature controlled Cover, the optional Presser reduces the empty volume of the measurement area thereby decreasing evaporation and at the same time helping to evenly spread semi solid materials over the measurement prism. These features offer improved performance on many samples. CalibrationThe J257 Refractometer offers 1 pt, 2 pt, or a full multi-point calibration. Calibration can be done at 20�C, 25�C or any user selectable temperature within the available range. Regardless of how many times the refractometer has been calibrated, it can always be restored to the initial factory calibration if required. User Configurable
DurabilityThe J Series refractometer offers a sapphire prism for high mechanical and chemical durability. The sample well is made of acid resistant 316 stainless steel with a techtron sealing ring. There is no lamp to change, the LED light source is guaranteed for 1,000,000 measurements. Options and Accessories
|
We currently have demo equipment available for the Refractometers, Smartchem and SPE Autosampler.
20/05/2008
This website is new! Any feedback would be greatly appreciated. info@alpe.net.au
Phone: 02 9543 7377
Mobile: 0418 489 842
Fax: 02 9543 7366
Email: sales@alpe.net.au