Dissolution - USP Dissolution

The System 3400V is an automated USP III dissolution sample collection system allowing for
subsequent analysis by UV or HPLC methods. The ADSC software can be used to control up to
(4) dissolution sampling systems using the parameters sample size‚ waste volume and media
replacement volume.


The SP-100 Peristaltic Pump is designed to withdraw samples with consistent accuracy and provides
high pressure to withdraw the samples through dissolution filters. The 3400V Automated Dissolution
Peri-Pump Sampling System assures collection and optional replacement of media with high volume
accuracy at each time interval. The system also can be programmed to clean itself before and after
a test.


In operation‚ the solid dosage samples are placed in the inner tubes. After attaching the lower
caps onto the inner tubes the assembly automatically aligns. The ADSC software then takes control
of the system for the entire test run. At test completion samples are ready to be transferred for
analysis by UV or HPLC.

Features:

• LOGAN DISSO III Classic USP III Dissolution Tester
• SP-100 (8) Channel Peristaltic Pump
• SCT-160 (160) Position Sample Collector
• Set of (8) sample delivery needles with vial-piercing capability
• LOGAN ADSC software package

Specification:

Drive positions 8 Spindles
Vessel 48 (8 tubes x 6 rows)
Dip speed range 5-50 dpm ±0.1 dpm
Temperature Room temp.-45€_C ±0.1€_C
Shaft size 1/4” diameter
Water bath Clear seamless acrylic
Heater 700 W
Voltage 110/220 V‚ 50/60 Hz